EVIL ENERGY Holden Commodore V8 Dual Plane Intake Manifold
---!@!start!@!---Specifications---!@!end!@!---
| Brand | EVIL ENERGY |
|---|---|
| Part Number | 2194 |
| Manifold Type | Dual Plane Carburetor Intake Manifold |
| Fuel System Compatibility | Carburetor |
| Carburetor Flange | Square / Spread Bore |
| Intake Style | Original-style intake / modified elbow and dual plane street performance layout |
| RPM Range | 2,500 - 4,800 RPM |
| Material | Cast Aluminum |
| Color / Variant | Silver/Black/Polished silver |
| Compatible Engine Family | Street Holden V8 253, 304, and 308 cid engines |
| Compatible Vehicles | Holden Monaro HQ-HZ Series (1971-1980, 253 / 308 V8 applications) Holden Statesman HQ-HZ Series (1971-1984, 308 V8 applications) Holden Belmont / Kingswood HK-HZ Series (1968-1980, 253 / 308 V8 applications) Holden Monaro SS HQ / HJ / HX / HZ (308 V8 applications) Holden Sandman (308 V8 applications) Holden Ute / Pickup Platforms (253 / 308 V8 applications) Holden Commodore VB-VL Early Models (1978-1986, carbureted 308 V8 applications) Holden Commodore Early V8 Performance Builds (253 / 304 / 308 street applications) |
| Dimensions | 21.18 in (L) x 11.5 in (W) x 4.86 in (H) / 537.86 mm x 291.98 mm x 123.5 mm |
| Best Use | Street Holden V8 builds, cruiser applications, classic Australian muscle cars, carburetor swaps, and low-to-mid RPM street performance |
---!@!start!@!---Description---!@!end!@!---
EVIL ENERGY Holden V8 Dual Plane Carburetor Intake Manifold
If your classic Holden V8 feels flat with an aging factory-style intake, mismatched carburetor setup, or weak mid-range response, the EVIL ENERGY Holden V8 intake manifold gives builders a carburetor-ready dual plane option for compatible 253, 304, and 308 cid street engines. Its 2,500-4,800 RPM range is aimed at cruiser builds, Monaro, Kingswood, Statesman, Commodore, Sandman, and Ute projects that need predictable throttle response and low-to-mid RPM drivability.
This dual plane intake manifold uses a divided plenum layout to support street-focused carburetor response across the RPM range where many classic Holden V8 builds spend most of their time. It is a practical option for builders replacing an older intake, planning a carburetor swap, refreshing a street Holden V8, or choosing a carburetor intake manifold for a classic Australian muscle car project.
Important: Always verify engine family, cylinder head configuration, carburetor flange requirement, square or spread bore carburetor setup, intake gasket style, hood clearance, throttle linkage, fuel line routing, and port alignment before ordering. This manifold is intended for compatible Holden V8 street applications and should not be assumed to fit unrelated GM, Chevy SBC, or LS engine families.
Vehicle and Engine Fitment
This Holden V8 intake manifold is designed for compatible street Holden 253, 304, and 308 cid V8 engines. Common reference applications include Holden Monaro HQ-HZ, Holden Statesman HQ-HZ, Holden Belmont / Kingswood HK-HZ, Holden Monaro SS, Holden Sandman, Holden Ute / pickup platforms, and early Holden Commodore VB-VL V8 applications.
Vehicle names are provided as reference examples only. Engine swaps, cylinder head changes, carburetor selection, square bore or spread bore flange requirements, air cleaner height, throttle linkage, accessory clearance, and hood clearance can affect final fitment. Before installation, confirm that your engine and carburetor setup match this Holden intake manifold.
Key Features - EVIL ENERGY Holden V8 Intake Manifold
- Holden 253 / 304 / 308 V8 Compatibility: Designed for compatible street Holden V8 engines used in classic Australian muscle car, cruiser, Ute, and Commodore projects.
- Dual Plane Carburetor Layout: The dual plane design supports street-focused throttle response, vacuum signal, and low-to-mid RPM drivability for compatible carbureted Holden V8 builds.
- 2,500-4,800 RPM Operating Range: Built around the RPM window commonly used in street driving, cruising, throttle roll-ons, and moderate performance use.
- Square / Spread Bore Carburetor Support: The listed square / spread bore flange gives builders a flexible carburetor setup path. Confirm carburetor base, gasket, linkage, and adapter requirements before installation.
- Cast Aluminum Construction: The cast aluminum body provides a durable intake platform while helping reduce weight compared with many older factory-style intake components.
- Street Holden V8 Build Friendly: A practical carb intake manifold option for compatible Monaro, Kingswood, Statesman, Sandman, Commodore, Ute, and Holden V8 street applications.
Package Contents and Installation Checklist
| EVIL ENERGY Intake Manifold, Part No. 2194 x 1 | One EVIL ENERGY Holden V8 dual plane carburetor intake manifold for compatible 253, 304, and 308 street applications. |
|---|---|
| Installation Hardware Kit x 1 | Includes mounting hardware and installation accessories. Confirm the hardware against your engine, cylinder heads, carburetor, gasket set, and accessory setup before final installation. |
Before Installation, Check These Items
- Confirm that your engine is a compatible Holden V8 253, 304, or 308 street application.
- Verify cylinder head configuration, intake port alignment, bolt pattern, and gasket compatibility.
- Confirm whether your carburetor uses a square bore or spread bore pattern and whether an adapter or specific gasket is required.
- Check throttle linkage, throttle cable bracket, fuel line routing, vacuum ports, PCV routing, and brake booster vacuum needs.
- Check hood clearance, air cleaner height, accessory bracket clearance, and distributor clearance.
- Use suitable intake gaskets and follow the proper torque sequence during installation.
Why Choose This Holden V8 Intake Manifold?
This Holden V8 dual plane intake manifold is designed for builders who want a street-friendly carburetor intake upgrade for compatible 253, 304, and 308 cid Holden engines. For many classic Holden street builds, throttle response, vacuum signal, cruising torque, carburetor compatibility, and low-to-mid RPM drivability matter more than peak high-RPM output.
For Monaro, Kingswood, Statesman, Sandman, Commodore, Ute, or classic Holden V8 projects, this EVIL ENERGY carburetor intake manifold provides a practical intake solution for cruiser builds, street refresh projects, and moderate performance applications. Final results depend on the full engine combination, carburetor size, camshaft, exhaust, ignition timing, fuel system, and installation quality.
---!@!start!@!---Specifications---!@!end!@!---
| Brand | EVIL ENERGY |
|---|---|
| Part Number | 2194 |
| Manifold Type | Dual Plane Carburetor Intake Manifold |
| Fuel System Compatibility | Carburetor |
| Carburetor Flange | Square / Spread Bore |
| Intake Style | Original-style intake / modified elbow and dual plane street performance layout |
| RPM Range | 2,500 - 4,800 RPM |
| Material | Cast Aluminum |
| Color / Variant | Silver/Black/Polished silver |
| Compatible Engine Family | Street Holden V8 253, 304, and 308 cid engines |
| Compatible Vehicles | Holden Monaro HQ-HZ Series (1971-1980, 253 / 308 V8 applications) Holden Statesman HQ-HZ Series (1971-1984, 308 V8 applications) Holden Belmont / Kingswood HK-HZ Series (1968-1980, 253 / 308 V8 applications) Holden Monaro SS HQ / HJ / HX / HZ (308 V8 applications) Holden Sandman (308 V8 applications) Holden Ute / Pickup Platforms (253 / 308 V8 applications) Holden Commodore VB-VL Early Models (1978-1986, carbureted 308 V8 applications) Holden Commodore Early V8 Performance Builds (253 / 304 / 308 street applications) |
| Dimensions | 21.18 in (L) x 11.5 in (W) x 4.86 in (H) / 537.86 mm x 291.98 mm x 123.5 mm |
| Best Use | Street Holden V8 builds, cruiser applications, classic Australian muscle cars, carburetor swaps, and low-to-mid RPM street performance |
---!@!start!@!---Description---!@!end!@!---
EVIL ENERGY Holden V8 Dual Plane Carburetor Intake Manifold
If your classic Holden V8 feels flat with an aging factory-style intake, mismatched carburetor setup, or weak mid-range response, the EVIL ENERGY Holden V8 intake manifold gives builders a carburetor-ready dual plane option for compatible 253, 304, and 308 cid street engines. Its 2,500-4,800 RPM range is aimed at cruiser builds, Monaro, Kingswood, Statesman, Commodore, Sandman, and Ute projects that need predictable throttle response and low-to-mid RPM drivability.
This dual plane intake manifold uses a divided plenum layout to support street-focused carburetor response across the RPM range where many classic Holden V8 builds spend most of their time. It is a practical option for builders replacing an older intake, planning a carburetor swap, refreshing a street Holden V8, or choosing a carburetor intake manifold for a classic Australian muscle car project.
Important: Always verify engine family, cylinder head configuration, carburetor flange requirement, square or spread bore carburetor setup, intake gasket style, hood clearance, throttle linkage, fuel line routing, and port alignment before ordering. This manifold is intended for compatible Holden V8 street applications and should not be assumed to fit unrelated GM, Chevy SBC, or LS engine families.
Vehicle and Engine Fitment
This Holden V8 intake manifold is designed for compatible street Holden 253, 304, and 308 cid V8 engines. Common reference applications include Holden Monaro HQ-HZ, Holden Statesman HQ-HZ, Holden Belmont / Kingswood HK-HZ, Holden Monaro SS, Holden Sandman, Holden Ute / pickup platforms, and early Holden Commodore VB-VL V8 applications.
Vehicle names are provided as reference examples only. Engine swaps, cylinder head changes, carburetor selection, square bore or spread bore flange requirements, air cleaner height, throttle linkage, accessory clearance, and hood clearance can affect final fitment. Before installation, confirm that your engine and carburetor setup match this Holden intake manifold.
Key Features - EVIL ENERGY Holden V8 Intake Manifold
- Holden 253 / 304 / 308 V8 Compatibility: Designed for compatible street Holden V8 engines used in classic Australian muscle car, cruiser, Ute, and Commodore projects.
- Dual Plane Carburetor Layout: The dual plane design supports street-focused throttle response, vacuum signal, and low-to-mid RPM drivability for compatible carbureted Holden V8 builds.
- 2,500-4,800 RPM Operating Range: Built around the RPM window commonly used in street driving, cruising, throttle roll-ons, and moderate performance use.
- Square / Spread Bore Carburetor Support: The listed square / spread bore flange gives builders a flexible carburetor setup path. Confirm carburetor base, gasket, linkage, and adapter requirements before installation.
- Cast Aluminum Construction: The cast aluminum body provides a durable intake platform while helping reduce weight compared with many older factory-style intake components.
- Street Holden V8 Build Friendly: A practical carb intake manifold option for compatible Monaro, Kingswood, Statesman, Sandman, Commodore, Ute, and Holden V8 street applications.
Package Contents and Installation Checklist
| EVIL ENERGY Intake Manifold, Part No. 2194 x 1 | One EVIL ENERGY Holden V8 dual plane carburetor intake manifold for compatible 253, 304, and 308 street applications. |
|---|---|
| Installation Hardware Kit x 1 | Includes mounting hardware and installation accessories. Confirm the hardware against your engine, cylinder heads, carburetor, gasket set, and accessory setup before final installation. |
Before Installation, Check These Items
- Confirm that your engine is a compatible Holden V8 253, 304, or 308 street application.
- Verify cylinder head configuration, intake port alignment, bolt pattern, and gasket compatibility.
- Confirm whether your carburetor uses a square bore or spread bore pattern and whether an adapter or specific gasket is required.
- Check throttle linkage, throttle cable bracket, fuel line routing, vacuum ports, PCV routing, and brake booster vacuum needs.
- Check hood clearance, air cleaner height, accessory bracket clearance, and distributor clearance.
- Use suitable intake gaskets and follow the proper torque sequence during installation.
Why Choose This Holden V8 Intake Manifold?
This Holden V8 dual plane intake manifold is designed for builders who want a street-friendly carburetor intake upgrade for compatible 253, 304, and 308 cid Holden engines. For many classic Holden street builds, throttle response, vacuum signal, cruising torque, carburetor compatibility, and low-to-mid RPM drivability matter more than peak high-RPM output.
For Monaro, Kingswood, Statesman, Sandman, Commodore, Ute, or classic Holden V8 projects, this EVIL ENERGY carburetor intake manifold provides a practical intake solution for cruiser builds, street refresh projects, and moderate performance applications. Final results depend on the full engine combination, carburetor size, camshaft, exhaust, ignition timing, fuel system, and installation quality.
Description
---!@!start!@!---Specifications---!@!end!@!---
| Brand | EVIL ENERGY |
|---|---|
| Part Number | 2194 |
| Manifold Type | Dual Plane Carburetor Intake Manifold |
| Fuel System Compatibility | Carburetor |
| Carburetor Flange | Square / Spread Bore |
| Intake Style | Original-style intake / modified elbow and dual plane street performance layout |
| RPM Range | 2,500 - 4,800 RPM |
| Material | Cast Aluminum |
| Color / Variant | Silver/Black/Polished silver |
| Compatible Engine Family | Street Holden V8 253, 304, and 308 cid engines |
| Compatible Vehicles | Holden Monaro HQ-HZ Series (1971-1980, 253 / 308 V8 applications) Holden Statesman HQ-HZ Series (1971-1984, 308 V8 applications) Holden Belmont / Kingswood HK-HZ Series (1968-1980, 253 / 308 V8 applications) Holden Monaro SS HQ / HJ / HX / HZ (308 V8 applications) Holden Sandman (308 V8 applications) Holden Ute / Pickup Platforms (253 / 308 V8 applications) Holden Commodore VB-VL Early Models (1978-1986, carbureted 308 V8 applications) Holden Commodore Early V8 Performance Builds (253 / 304 / 308 street applications) |
| Dimensions | 21.18 in (L) x 11.5 in (W) x 4.86 in (H) / 537.86 mm x 291.98 mm x 123.5 mm |
| Best Use | Street Holden V8 builds, cruiser applications, classic Australian muscle cars, carburetor swaps, and low-to-mid RPM street performance |
---!@!start!@!---Description---!@!end!@!---
EVIL ENERGY Holden V8 Dual Plane Carburetor Intake Manifold
If your classic Holden V8 feels flat with an aging factory-style intake, mismatched carburetor setup, or weak mid-range response, the EVIL ENERGY Holden V8 intake manifold gives builders a carburetor-ready dual plane option for compatible 253, 304, and 308 cid street engines. Its 2,500-4,800 RPM range is aimed at cruiser builds, Monaro, Kingswood, Statesman, Commodore, Sandman, and Ute projects that need predictable throttle response and low-to-mid RPM drivability.
This dual plane intake manifold uses a divided plenum layout to support street-focused carburetor response across the RPM range where many classic Holden V8 builds spend most of their time. It is a practical option for builders replacing an older intake, planning a carburetor swap, refreshing a street Holden V8, or choosing a carburetor intake manifold for a classic Australian muscle car project.
Important: Always verify engine family, cylinder head configuration, carburetor flange requirement, square or spread bore carburetor setup, intake gasket style, hood clearance, throttle linkage, fuel line routing, and port alignment before ordering. This manifold is intended for compatible Holden V8 street applications and should not be assumed to fit unrelated GM, Chevy SBC, or LS engine families.
Vehicle and Engine Fitment
This Holden V8 intake manifold is designed for compatible street Holden 253, 304, and 308 cid V8 engines. Common reference applications include Holden Monaro HQ-HZ, Holden Statesman HQ-HZ, Holden Belmont / Kingswood HK-HZ, Holden Monaro SS, Holden Sandman, Holden Ute / pickup platforms, and early Holden Commodore VB-VL V8 applications.
Vehicle names are provided as reference examples only. Engine swaps, cylinder head changes, carburetor selection, square bore or spread bore flange requirements, air cleaner height, throttle linkage, accessory clearance, and hood clearance can affect final fitment. Before installation, confirm that your engine and carburetor setup match this Holden intake manifold.
Key Features - EVIL ENERGY Holden V8 Intake Manifold
- Holden 253 / 304 / 308 V8 Compatibility: Designed for compatible street Holden V8 engines used in classic Australian muscle car, cruiser, Ute, and Commodore projects.
- Dual Plane Carburetor Layout: The dual plane design supports street-focused throttle response, vacuum signal, and low-to-mid RPM drivability for compatible carbureted Holden V8 builds.
- 2,500-4,800 RPM Operating Range: Built around the RPM window commonly used in street driving, cruising, throttle roll-ons, and moderate performance use.
- Square / Spread Bore Carburetor Support: The listed square / spread bore flange gives builders a flexible carburetor setup path. Confirm carburetor base, gasket, linkage, and adapter requirements before installation.
- Cast Aluminum Construction: The cast aluminum body provides a durable intake platform while helping reduce weight compared with many older factory-style intake components.
- Street Holden V8 Build Friendly: A practical carb intake manifold option for compatible Monaro, Kingswood, Statesman, Sandman, Commodore, Ute, and Holden V8 street applications.
Package Contents and Installation Checklist
| EVIL ENERGY Intake Manifold, Part No. 2194 x 1 | One EVIL ENERGY Holden V8 dual plane carburetor intake manifold for compatible 253, 304, and 308 street applications. |
|---|---|
| Installation Hardware Kit x 1 | Includes mounting hardware and installation accessories. Confirm the hardware against your engine, cylinder heads, carburetor, gasket set, and accessory setup before final installation. |
Before Installation, Check These Items
- Confirm that your engine is a compatible Holden V8 253, 304, or 308 street application.
- Verify cylinder head configuration, intake port alignment, bolt pattern, and gasket compatibility.
- Confirm whether your carburetor uses a square bore or spread bore pattern and whether an adapter or specific gasket is required.
- Check throttle linkage, throttle cable bracket, fuel line routing, vacuum ports, PCV routing, and brake booster vacuum needs.
- Check hood clearance, air cleaner height, accessory bracket clearance, and distributor clearance.
- Use suitable intake gaskets and follow the proper torque sequence during installation.
Why Choose This Holden V8 Intake Manifold?
This Holden V8 dual plane intake manifold is designed for builders who want a street-friendly carburetor intake upgrade for compatible 253, 304, and 308 cid Holden engines. For many classic Holden street builds, throttle response, vacuum signal, cruising torque, carburetor compatibility, and low-to-mid RPM drivability matter more than peak high-RPM output.
For Monaro, Kingswood, Statesman, Sandman, Commodore, Ute, or classic Holden V8 projects, this EVIL ENERGY carburetor intake manifold provides a practical intake solution for cruiser builds, street refresh projects, and moderate performance applications. Final results depend on the full engine combination, carburetor size, camshaft, exhaust, ignition timing, fuel system, and installation quality.
